FIND THE ROOFING PROFILE YOU NEED
Roofing & Sheetmetal Centre supply a range of roof sheet profiles to suit your project. We are a registered reseller of roof sheet products including Stramit, Lysaght and Ampelite Australia, including the ever popular roof profiles like Corrugated, Klip Lok®, and Speed Deck Ultra®.
Factors such as roof slope and environmental factors can determine which profile is best for your project. If you’re not sure what you need, you can compare profiles here.
Turnaround time for orders in most cases is approximately 72 hours.
Get in touch with us if you would like to chat about your options, or would like to place an order.
TRIMDEK®
Versatile roof and wall cladding featuring bold, trapezoidal ribs and subtle fluting in the pans.
FEATURES
- Long spanning cladding permitting wide support spacing
- Finish: COLORBOND® , ZINCALUME®
- Base Material Thickness: 0.42mm, 0.48mm
- Can be used with TRIM-KLIP™ end and expansion joint system
- Width: 762mm
- Minimum roof slope: 2°
- Download the brochure
KLIP-LOK 700 HI-STRENGTH®
An advancement of the original concealed fix roof cladding with bold ribs making a strong visual statement.
FEATURES
- Concealed fixed offering supreme watertightness
- Can be used with LOK-KLIP® end and expansion joint system
- Finish: COLORBOND® , ZINCALUME®
- Base Material Thickness: 0.42mm, 0.48mm
- Width: 700mm
- Minimum roof slope: 1° (subject to design provisions being met)
- Download the brochure
SPANDEK®
A modern, simple square-corrugated profile that is strong, impact resistant and economical.
FEATURES
- Highly serviceable roofing and walling cladding
- Bold ribs offer high strength and high water carrying capacity
- Finish: COLORBOND® , ZINCALUME®
- Base Material Thickness: 0.42mm, 0.48mm
- Width: 700mm
- Minimum roof slope: 2° (subject to design provisions being met)
CUSTOM ORB®
The original Australian corrugated roof sheeting and wall cladding ideal for a wide range of applications.
FEATURES
- Finish: COLORBOND® , ZINCALUME®
- Base Material Thickness: 0.42mm, 0.48mm
- Lightweight yet strong
- Width: 762mm
- Minimum roof slope: 5°
Stramit® Corrugated Roof and Wall Cladding
FEATURES
- Base Material Thickness (mm): 0.42, 0.48, 0.60
- Finish: COLORBOND® , ZINCALUME®, Galvanised
- Lightweight and easy to handle
- Cost-effective to use and quick to install
- Minimum 5° roof pitch
Stramit Speed Deck Ultra® Concealed Fixed Decking
FEATURES
- Base Material Thickness (mm): 0.42, 0.48
- Finish: COLORBOND® , ZINCALUME®
- Outstanding wind load resistance and water-carrying capacity
- Minimum 1° roof pitch
- Full length clips to correctly locate ribs and compress insulation
Stramit Monoclad® Roof and Wall Cladding
FEATURES
- Base Material Thickness (mm): 0.42, 0.48
- Finish: COLORBOND® , ZINCALUME®
- 29mm ribs provide excellent spanning and water-carrying capacity
- Compatible Stramit Monolap® lap joint system allows for single plane, long run roofs
- Minimum 2° roof pitch
Stramit Longspan® Roof and Wall Cladding
FEATURES
- Base Material Thickness (mm): 0.42, 0.48
- Finish: COLORBOND® , ZINCALUME®, Galvanised
- Architectural flexibility accommodates curved roofs
- Suits roof pitches as low as 3 degrees (2 degrees is sufficient for Class 1 and 10 buildings)
AMPELITE POLYCARBONATE ROOFING
We supply Solasafe polycarbonate roofing from Ampelite Australia. Polycarbonate roofing is tough, hardwearing and provides protection from UV rays while letting in light. Coming in a range of profiles and a range of options to suit your needs,
We can help you find the right roofing profile for your needs. Get in touch and we’ll explore the options available to you through our supplier network.
Email: sales@rscentre.com.au
Phone: 9791 5355